FIRE PREVENTION SYSTEM MAINTENANCE IN NAPLES
A perfectly efficient fire extinguishing or detection system can be more useful than all the means present in a Fire Brigade Command: if used promptly and correctly in the event of a fire, within the limits of its extinguishing capacity, it allows for the limitation of material damage and the protection of people's safety.
FIRE DETECTION SYSTEMS
The efficiency of an active protection system, whether it is a detection or extinguishing system, is as much
the greater the better the care taken in its management and the quality of the maintenance carried out.
HYDRANT NETWORK SYSTEMS
The periodic check consists of a series of operations aimed at verifying the complete and correct functionality of the components
of fire hydrant networks, under the normal conditions existing in the environment in which it is installed.
SMOKE DETECTION SYSTEMS
A fire detection system is a set of fire alarm system components capable of detecting and signaling the presence of a fire within a building or other infrastructure.
SPRINKLER SYSTEMS
As with other types of fire extinguishers, sprinklers also require periodic inspections, both by the user and by qualified personnel. The frequency and type of inspection are established by UNI EN 12845.
Fire Prevention 4.0
Fire protection systems and equipment require proper maintenance to ensure long-term reliability and proper operation in the event of a fire. The Ministerial Decree of March 10, 1998, lists all the fire protection measures required to ensure safe use, fire suppression, and fire detection and alarm. These measures must be monitored, inspected periodically, and maintained to ensure efficiency.
Our company is authorized as per Ministerial Decree 37/08 for the Letters ABCDEFG
SMOKE DETECTION SYSTEM MAINTENANCE
With reference to the UNI 11224:2011 regulation, our technicians carry out a series of tests every six months.
- Check the status and indications of the control unit;
- Checking for correct reporting at the control center;
- Verification of the effectiveness of local reporting systems;
- Check conditions and alarm signals;
- Checking for correct reporting to any telephone numbers via telephone dialer:
- Recording of verified reports;
- Recording of out-of-service reports
- Verification of smoke sensors and/or barriers with on-site detector testing;
- Check correct suction of the system (where present)
- Checking fault signals and conditions;
- Check the status of power sources;
- General system check;
- Final technical report on the state of the system.
Trust us
for the maintenance of your fire prevention system!
Qualified technicians available 24/7
Maintenance of pumping stations.
Sme Antincendio provides surveillance and routine maintenance services for fire pump units (electric and diesel motor pumps), including quarterly, semi-annual, and annual inspections and extraordinary maintenance required by current regulations. Visits are scheduled and performed by qualified technical personnel.
Some components of fire protection systems are almost never seen because they are located in service areas and go unnoticed. This is the case with pumping stations.
However, these equipments are also subject to periodic maintenance for pumping stations (weekly, monthly, quarterly, half-yearly, annually, triennially and decennially).
"NORMATIVE REFERENCES UNI EN 12845 STANDARD: Fire-fighting water supplies".
What actions should be taken:
Periodic maintenance of pumping stations must always be performed by a specialized company and must include, at least once a year, a technical visit by an engineer who can ensure maintenance of diesel units where applicable. The contractor is therefore only responsible for weekly and monthly inspections and checks, which must be performed according to specific training.
Do you want to work in a safe environment? Do you want peace of mind day and night?
Do you want to delegate an ethical and legally relevant responsibility?
Then you need a pump station maintenance program with
Sme Fire Alarm!
Contact us
